PSB Sports Braces Ankle Brace  £32.99

View Larger Image
Play Slideshow (6 images)
External Stock IDStockOptionQuantityPriceRRPSaving
PSB005BIn StockLeft - Small1
Save 50%
PSB004BIn StockRight - Extra Large1
Save 50%
Order in 5 Hours 36 minutes 46 seconds for dispatch today
Postage to United Kingdom on this item starts at £2.99
  • Description
  • Reviews (3)
  • Price Match Request
  • Q&A
  • Help

The PSB Ankle Brace is unique in that it does not inhibit normal movement while providing optimal support for the ankle joint. Less bulky than a tradtional brace the PSB Ankle Brace fits perfectly in sports shoes and combines well with shin pads.

Fitting video


Another benefit is provided by the sophisticated tape design, which immediately blocks the ankle joint if it threatens to move too far inwards, as is the case with most ankle traumas. The pale blue power net, which exerts the pressure around the ankle joint, can be individually adjusted.

Easy to size.

The PSB Ankle Brace is available in three sizes (see table on reverse) and a left and right version.

To determine the correct size you need to measure the total circumference of your instep: Over the instep and along the back of the heel (see illustration). Fit the brace and ensure that the sock fits comfortably and that you can easily tighten the tapes.

This improves the functionality of the PSB Ankle Brace and makes it more comfortable to wear.

Easy fit.

1 Pull the sock over your foot (see Fig. 1). The gap in the brace for the heel can make it easier to put on the sock. 

2 Put the plastic stiffener under the centre of the heel making sure it is not under the hollow of the foot. 

3 Put your foot on the floor at an angle of 90 degrees to your lower leg.

4 Take the back tape marked ( through the last eye of the stiffener (see Fig. 2). Tighten the tape and fasten the Velcro. Ensure the stiffener stays vertical.

5 Now take the front tape marked (( through the front eye of the stiffener and fasten it (see Fig. 3). If the stiffener presses against your ankle bone you will need to adjust the tapes.

6 Fasten the pale blue power net and hold the part with the soft Velcro against your ankle.

7 Adjust the tension of the power net using the end of the hard Velcro and fasten (see Fig. 4).

Easy wash.

The PSB Ankle Brace is easy to care for and can be washed at up to 40 degrees C in the washing machine. Higher temperatures should be avoided, as they will damage the elastic materials.

Correct application.

Fit the stiffener so that it goes along the back of the ankle bone. This will prevent it from pressing on the ankle bone or the sensitive hollow of your foot when you move. 

Only wear the PSB Ankle Brace in well fitting sports shoes and ensure that the stiffener is always on the inside of the ankle.

If you feel continuous pressure under your heel, check to ensure that the stiffener is correctly in place. Experience shows that the pressure will disappear after a number of training sessions.

Before use, check whether your sport brace shows any signs of damage or wear, which will reduce pressure and efficiency.

Please be aware that an ill-fitting brace does not function properly.

PSB Ankle Brace. 
Sizes: Small, Medium, Large, XLarge

Unsuitable for:

Sports practised wearing soft or no shoes (such as gym and ballet). Well fitting sport shoes are essential to optimal support. 
Otherwise there are no known conditions that preclude wearing an ankle brace. Pain should always be seen as a warning. 
In case of continuing pain or other symptoms for which there is no clear cause, you should always consult your GP, physiotherapist or sport therapist.

This brace contains rigid elements, if you are in doubt about its suitability in your sport please contact your governing body.

Our Best Selling PSB Sports Braces Ankle Support, Plantar Fasciitis & Foot Braces
Loading ...
Our Best Selling Ankle Support, Plantar Fasciitis & Foot Braces
Loading ...