Flexiseq Arthritis Gel‎ 50g  £20.34


Flexiseq pain relief gel for osteoarthritis treatment from Vivomed
View Larger Image
External Stock IDStockOptionQuantityPriceRRPSaving
FLE0301LIn Stock50 grams1
£20.34
 £20.89
Save 3%
 
Buy
Order in 6 Hours 32 minutes 47 seconds for dispatch today
Postage to United Kingdom on this item starts at £2.99
  • Description
  • Reviews (5)
  • Q&A
  • Help

Flexiseq is a drug-free, topical  therapy for the treatment of osteoarthritis. It is a water based gel with the unique Sequessome Best new product Flexiseq VivomedTechnology™ which is clinically proven to relieve pain and improve joint flexibility. Improvements in joint flexibility can be seen in the patient within two to ten days, after twice daily application to the affected area.

Please see the review on the Arthritis Research UK for an independent overview of Flexiseq.

Please see videos about Flexiseq and how it can be used to treat arthritis below for more information.

Important!

Step 1: ensuring you have the right dose

The first time you use FLEXISEQ™, estimate the amount of gel you need to squeeze out of the tube as follows:

1. For a knee, shoulder or hip, a line as long as your index finger.

2. For an ankle, wrist or the fingers on one hand, a line as long as half of your index finger.

It is important that you personalise the dose for the particular joint you are treating.

 

You must allow the FLEXISEQ™ gel to dry for at least 10 minutes,

or until the skin is touch dry before covering the area.

If the gel is taking longer than 10 minutes to dry, you have

probably applied too much. The excess can be wiped off and

you should try using a little less next time.

If the gel is taking less than 10 minutes, you should apply a little

more next time.

Step 2: R educing the application time

Having completed Step 1 and ensured you have worked out

the right amount to apply for your particular joints, you can

reduce the time it takes for FLEXISEQ™ to dry by:

• Warming the skin before applying the gel

• Using a hairdryer on a medium setting after applying

the gel, which should reduce the drying time to about

2 minutes

Evenly cover the soft tissue at the front and the back of the joint

(do not apply to the knee cap).

 

Flexiseq™ instructions for use

(Additional Information)

FLEXISEQ™ is a new, innovative solution to joint pain with a completely novel mode of action.

Unlike normal topical products which are rubbed into the skin, the nano-physical nature

of the FLEXISEQ™ gel requires a different method of application that you may not be used to.

For maximum benefit and penetration, it is important to apply FLEXISEQ™ Gel correctly,

otherwise you may find yourself using more gel than you really need to. Please note the

following points carefully:

l Spread an even layer of FLEXISEQ™ Gel to the affected joint. There is no need to rub heavily

or massage

If treating a knee, target the soft skin around the sides and front of joint, including the back

of the knee but avoiding the bony knee cap

It is important that the gel has fully dried before covering with clothing. FLEXISEQ™’s

Sequessome Technology® works when the formulation dries on the surface of the skin and

the Sequessome™ vesicles then move into and through the skin

The skin should be dry or slightly tacky to the touch but this is normal after drying. Residual

tackiness can be removed by wiping with a soft cloth. There should be no undried gel

visible on the skin and none should come away on the fingers when touched. Covering

the gel before this will not only result in some gel coming away on your clothes but will

prevent the gel from drying to the point where the Sequessome™ vesicles want to move

into the skin

Natural drying time should be approximately 10 minutes

If the gel is taking longer than 10 minutes to dry, you may have applied too much.

Next time try using a little less. Experiment until you find that you are achieving a natural

drying time of about 10 minutes

If you are short of time, the drying time can be shortened by:

– applying a heat pad (e.g. a microwaveable grain bag) to the skin before applying

FLEXISEQ™ Gel

– applying FLEXISEQ™ after a warm bath or shower and after towel drying

– using a hair dryer on a medium setting after application of FLEXISEQ™ Gel

And now you can complete dressing and cover the joint with clothing, as required

Never freeze FLEXISEQ™ as it damages the Sequessome™ vesicles and stops it working

 



Our Best Selling Warming, Cooling & Pain Relief
Loading ...